Updated: 2022/Sep/29

Please read Privacy Policy. It's for your privacy.


INET(3)                    Library Functions Manual                    INET(3)

NAME
     inet_addr, inet_aton, inet_lnaof, inet_makeaddr, inet_netof,
     inet_network, inet_ntoa, inet_ntop, inet_pton, addr, ntoa, network -
     Internet address manipulation routines

LIBRARY
     Standard C Library (libc, -lc)

SYNOPSIS
     #include <arpa/inet.h>

     in_addr_t
     inet_addr(const char *cp);

     int
     inet_aton(const char *cp, struct in_addr *addr);

     in_addr_t
     inet_lnaof(struct in_addr in);

     struct in_addr
     inet_makeaddr(in_addr_t net, in_addr_t lna);

     in_addr_t
     inet_netof(struct in_addr in);

     in_addr_t
     inet_network(const char *cp);

     char *
     inet_ntoa(struct in_addr in);

     const char *
     inet_ntop(int af, const void * restrict src, char * restrict dst,
         socklen_t size);

     int
     inet_pton(int af, const char * restrict src, void * restrict dst);

DESCRIPTION
     The routines inet_aton(), inet_addr() and inet_network() interpret
     character strings representing numbers expressed in the Internet standard
     "dotted quad" notation.

     The inet_pton() function converts a presentation format address (that is,
     printable form as held in a character string) to network format (usually
     a struct in_addr or some other internal binary representation, in network
     byte order).  It returns 1 if the address was valid for the specified
     address family, or 0 if the address wasn't parsable in the specified
     address family, or -1 if some system error occurred (in which case errno
     will have been set).  This function is presently valid for AF_INET and
     AF_INET6.

     The inet_aton() routine interprets the specified character string as an
     Internet address, placing the address into the structure provided.  It
     returns 1 if the string was successfully interpreted, or 0 if the string
     is invalid.

     The inet_addr() and inet_network() functions return numbers suitable for
     use as Internet addresses and Internet network numbers, respectively.

     The function inet_ntop() converts an address from network format (usually
     a struct in_addr or some other binary form, in network byte order) to
     presentation format (suitable for external display purposes).  It returns
     NULL if a system error occurs (in which case, errno will have been set),
     or it returns a pointer to the destination string.  The size parameter is
     the size of the dst buffer.  For AF_INET, this must have space for
     INET_ADDRSTRLEN (16) bytes; for AF_INET6, this must have space for
     INET6_ADDRSTRLEN (46) bytes.

     The routine inet_ntoa() takes an Internet address and returns an ASCII
     string representing the address in "dotted quad" notation.

     The routine inet_makeaddr() takes an Internet network number and a local
     network address (both in host order) and constructs an Internet address
     from it.  Note that to convert only a single value to a struct in_addr
     form that value should be passed as the first parameter and `0L' should
     be given for the second parameter.

     The routines inet_netof() and inet_lnaof() break apart Internet host
     addresses, returning the network number and local network address part,
     respectively (both in host order).

     All Internet addresses are returned in network order (bytes ordered from
     left to right).  All network numbers and local address parts are returned
     as machine format integer values.

INTERNET ADDRESSES (IP VERSION 4)
     Values specified using the "dotted quad" notation take one of the
     following forms:

           a.b.c.d
           a.b.c
           a.b
           a

     When four parts are specified, each is interpreted as a byte of data and
     assigned, from left to right, to the four bytes of an Internet address.
     Note that when an Internet address is viewed as a 32-bit integer quantity
     on a system that uses little-endian byte order (e.g.  Intel i386, i486
     and Pentium processors) the bytes referred to above appear as "d.c.b.a".
     That is, little-endian bytes are ordered from right to left.

     When a three part address is specified, the last part is interpreted as a
     16-bit quantity and placed in the right-most two bytes of the network
     address.  This makes the three part address format convenient for
     specifying Class B network addresses as "128.net.host".

     When a two part address is supplied, the last part is interpreted as a
     24-bit quantity and placed in the right most three bytes of the network
     address.  This makes the two part address format convenient for
     specifying Class A network addresses as "net.host".

     When only one part is given, the value is stored directly in the network
     address without any byte rearrangement.

     All numbers supplied as "parts" in a "dotted quad" notation may be
     decimal, octal, or hexadecimal, as specified in the C language (i.e., a
     leading 0x or 0X implies hexadecimal; otherwise, a leading 0 implies
     octal; otherwise, the number is interpreted as decimal).

INTERNET ADDRESSES (IP VERSION 6)
     In order to support scoped IPv6 addresses, the use of getaddrinfo(3) and
     getnameinfo(3) is recommended rather than the functions presented here.

     The presentation format of an IPv6 address is given in RFC 2373:

     There are three conventional forms for representing IPv6 addresses as
     text strings:

     1.   The preferred form is x:x:x:x:x:x:x:x, where the 'x's are the
          hexadecimal values of the eight 16-bit pieces of the address.
          Examples:

                FEDC:BA98:7654:3210:FEDC:BA98:7654:3210
                1080:0:0:0:8:800:200C:417A

          Note that it is not necessary to write the leading zeros in an
          individual field, but there must be at least one numeral in every
          field (except for the case described in 2).

     2.   Due to the method of allocating certain styles of IPv6 addresses, it
          will be common for addresses to contain long strings of zero bits.
          In order to make writing addresses containing zero bits easier, a
          special syntax is available to compress the zeros.  The use of
          ``::'' indicates multiple groups of 16-bits of zeros.  The ``::''
          can only appear once in an address.  The ``::'' can also be used to
          compress the leading and/or trailing zeros in an address.

          For example the following addresses:

                1080:0:0:0:8:800:200C:417A  a unicast address
                FF01:0:0:0:0:0:0:43         a multicast address
                0:0:0:0:0:0:0:1             the loopback address
                0:0:0:0:0:0:0:0             the unspecified addresses

          may be represented as:

                1080::8:800:200C:417A       a unicast address
                FF01::43                    a multicast address
                ::1                         the loopback address
                ::                          the unspecified addresses

     3.   An alternative form that is sometimes more convenient when dealing
          with a mixed environment of IPv4 and IPv6 nodes is
          x:x:x:x:x:x:d.d.d.d, where the 'x's are the hexadecimal values of
          the six high-order 16-bit pieces of the address, and the 'd's are
          the decimal values of the four low-order 8-bit pieces of the address
          (standard IPv4 representation).  Examples:

                0:0:0:0:0:0:13.1.68.3
                0:0:0:0:0:FFFF:129.144.52.38

          or in compressed form:

                ::13.1.68.3
                ::FFFF:129.144.52.38

RETURN VALUES
     The constant INADDR_NONE is returned by inet_addr() and inet_network()
     for malformed requests.

ERRORS
     The inet_ntop() and inet_pton() functions may fail with

     [EAFNOSUPPORT]     The value of af was not AF_INET or AF_INET6.

     The inet_ntop() function may fail with

     [ENOSPC]           The size indicated for dst was too small to store the
                        presentation form of the network address.

SEE ALSO
     byteorder(3), gethostbyname(3), getnetent(3), inet_net(3), hosts(5),
     networks(5)

     IP Version 6 Addressing Architecture, RFC 2373, July 1998.

     Basic Socket Interface Extensions for IPv6, RFC 3493, February 2003.

STANDARDS
     The inet_ntop() and inet_pton() functions conform to IEEE Std 1003.1-2001
     ("POSIX.1").  Note that inet_pton() does not accept 1-, 2-, or 3-part
     dotted addresses; all four parts must be specified.  Additionally all
     four parts of a dotted address must be decimal.  This is a narrower input
     set than that accepted by inet_aton().

HISTORY
     The inet_addr(), inet_network(), inet_makeaddr(), inet_lnaof() and
     inet_netof() functions appeared in 4.2BSD.  They were changed to use
     in_addr_t in place of unsigned long in NetBSD 2.0.  The inet_aton() and
     inet_ntoa() functions appeared in 4.3BSD.  The inet_pton() and
     inet_ntop() functions appeared in BIND 4.9.4 and thence NetBSD 1.3; they
     were also in X/Open Networking Services Issue 5.2 ("XNS5.2").

BUGS
     The value INADDR_NONE (0xffffffff) is a valid broadcast address, but
     inet_addr() cannot return that value without indicating failure.  The
     newer inet_aton() function does not share this problem.

     The problem of host byte ordering versus network byte ordering is
     confusing.

     The string returned by inet_ntoa() resides in a static memory area.

     The function inet_addr() should return a struct in_addr.

     The function inet_network() does not support byte rearrangement for one,
     two, and three part addresses.

NetBSD 10.99                     July 25, 2012                    NetBSD 10.99