Updated: 2022/Sep/29
Please read Privacy Policy. It's for your privacy.
PKCS12(1) OpenSSL PKCS12(1)
NAME
openssl-pkcs12, pkcs12 - PKCS#12 file utility
LIBRARY
libcrypto, -lcrypto
SYNOPSIS
openssl pkcs12 [-help] [-export] [-chain] [-inkey file_or_id]
[-certfile filename] [-name name] [-caname name] [-in filename] [-out
filename] [-noout] [-nomacver] [-nocerts] [-clcerts] [-cacerts]
[-nokeys] [-info] [-des | -des3 | -idea | -aes128 | -aes192 | -aes256 |
-aria128 | -aria192 | -aria256 | -camellia128 | -camellia192 |
-camellia256 | -nodes] [-noiter] [-maciter | -nomaciter | -nomac]
[-twopass] [-descert] [-certpbe cipher] [-keypbe cipher] [-macalg
digest] [-keyex] [-keysig] [-password arg] [-passin arg] [-passout arg]
[-rand file...] [-writerand file] [-CAfile file] [-CApath dir]
[-no-CAfile] [-no-CApath] [-CSP name]
DESCRIPTION
The pkcs12 command allows PKCS#12 files (sometimes referred to as PFX
files) to be created and parsed. PKCS#12 files are used by several
programs including Netscape, MSIE and MS Outlook.
OPTIONS
There are a lot of options the meaning of some depends of whether a
PKCS#12 file is being created or parsed. By default a PKCS#12 file is
parsed. A PKCS#12 file can be created by using the -export option (see
below).
PARSING OPTIONS
-help
Print out a usage message.
-in filename
This specifies filename of the PKCS#12 file to be parsed. Standard
input is used by default.
-out filename
The filename to write certificates and private keys to, standard
output by default. They are all written in PEM format.
-passin arg
The PKCS#12 file (i.e. input file) password source. For more
information about the format of arg see the PASS PHRASE ARGUMENTS
section in openssl(1).
-passout arg
Pass phrase source to encrypt any outputted private keys with. For
more information about the format of arg see the PASS PHRASE
ARGUMENTS section in openssl(1).
-password arg
With -export, -password is equivalent to -passout. Otherwise,
-password is equivalent to -passin.
-noout
This option inhibits output of the keys and certificates to the
output file version of the PKCS#12 file.
-clcerts
Only output client certificates (not CA certificates).
-cacerts
Only output CA certificates (not client certificates).
-nocerts
No certificates at all will be output.
-nokeys
No private keys will be output.
-info
Output additional information about the PKCS#12 file structure,
algorithms used and iteration counts.
-des
Use DES to encrypt private keys before outputting.
-des3
Use triple DES to encrypt private keys before outputting, this is
the default.
-idea
Use IDEA to encrypt private keys before outputting.
-aes128, -aes192, -aes256
Use AES to encrypt private keys before outputting.
-aria128, -aria192, -aria256
Use ARIA to encrypt private keys before outputting.
-camellia128, -camellia192, -camellia256
Use Camellia to encrypt private keys before outputting.
-nodes
Don't encrypt the private keys at all.
-nomacver
Don't attempt to verify the integrity MAC before reading the file.
-twopass
Prompt for separate integrity and encryption passwords: most
software always assumes these are the same so this option will
render such PKCS#12 files unreadable. Cannot be used in combination
with the options -password, -passin (if importing) or -passout (if
exporting).
FILE CREATION OPTIONS
-export
This option specifies that a PKCS#12 file will be created rather
than parsed.
-out filename
This specifies filename to write the PKCS#12 file to. Standard
output is used by default.
-in filename
The filename to read certificates and private keys from, standard
input by default. They must all be in PEM format. The order
doesn't matter but one private key and its corresponding
certificate should be present. If additional certificates are
present they will also be included in the PKCS#12 file.
-inkey file_or_id
File to read private key from. If not present then a private key
must be present in the input file. If no engine is used, the
argument is taken as a file; if an engine is specified, the
argument is given to the engine as a key identifier.
-name friendlyname
This specifies the "friendly name" for the certificate and private
key. This name is typically displayed in list boxes by software
importing the file.
-certfile filename
A filename to read additional certificates from.
-caname friendlyname
This specifies the "friendly name" for other certificates. This
option may be used multiple times to specify names for all
certificates in the order they appear. Netscape ignores friendly
names on other certificates whereas MSIE displays them.
-pass arg, -passout arg
The PKCS#12 file (i.e. output file) password source. For more
information about the format of arg see the PASS PHRASE ARGUMENTS
section in openssl(1).
-passin password
Pass phrase source to decrypt any input private keys with. For more
information about the format of arg see the PASS PHRASE ARGUMENTS
section in openssl(1).
-chain
If this option is present then an attempt is made to include the
entire certificate chain of the user certificate. The standard CA
store is used for this search. If the search fails it is considered
a fatal error.
-descert
Encrypt the certificate using triple DES, this may render the
PKCS#12 file unreadable by some "export grade" software. By default
the private key is encrypted using triple DES and the certificate
using 40 bit RC2 unless RC2 is disabled in which case triple DES is
used.
-keypbe alg, -certpbe alg
These options allow the algorithm used to encrypt the private key
and certificates to be selected. Any PKCS#5 v1.5 or PKCS#12 PBE
algorithm name can be used (see NOTES section for more
information). If a cipher name (as output by the list-cipher-
algorithms command is specified then it is used with PKCS#5 v2.0.
For interoperability reasons it is advisable to only use PKCS#12
algorithms.
-keyex|-keysig
Specifies that the private key is to be used for key exchange or
just signing. This option is only interpreted by MSIE and similar
MS software. Normally "export grade" software will only allow 512
bit RSA keys to be used for encryption purposes but arbitrary
length keys for signing. The -keysig option marks the key for
signing only. Signing only keys can be used for S/MIME signing,
authenticode (ActiveX control signing) and SSL client
authentication, however, due to a bug only MSIE 5.0 and later
support the use of signing only keys for SSL client authentication.
-macalg digest
Specify the MAC digest algorithm. If not included them SHA1 will be
used.
-nomaciter, -noiter
These options affect the iteration counts on the MAC and key
algorithms. Unless you wish to produce files compatible with MSIE
4.0 you should leave these options alone.
To discourage attacks by using large dictionaries of common
passwords the algorithm that derives keys from passwords can have
an iteration count applied to it: this causes a certain part of the
algorithm to be repeated and slows it down. The MAC is used to
check the file integrity but since it will normally have the same
password as the keys and certificates it could also be attacked.
By default both MAC and encryption iteration counts are set to
2048, using these options the MAC and encryption iteration counts
can be set to 1, since this reduces the file security you should
not use these options unless you really have to. Most software
supports both MAC and key iteration counts. MSIE 4.0 doesn't
support MAC iteration counts so it needs the -nomaciter option.
-maciter
This option is included for compatibility with previous versions,
it used to be needed to use MAC iterations counts but they are now
used by default.
-nomac
Don't attempt to provide the MAC integrity.
-rand file...
A file or files containing random data used to seed the random
number generator. Multiple files can be specified separated by an
OS-dependent character. The separator is ; for MS-Windows, , for
OpenVMS, and : for all others.
[-writerand file]
Writes random data to the specified file upon exit. This can be
used with a subsequent -rand flag.
-CAfile file
CA storage as a file.
-CApath dir
CA storage as a directory. This directory must be a standard
certificate directory: that is a hash of each subject name (using
x509 -hash) should be linked to each certificate.
-no-CAfile
Do not load the trusted CA certificates from the default file
location.
-no-CApath
Do not load the trusted CA certificates from the default directory
location.
-CSP name
Write name as a Microsoft CSP name.
NOTES
Although there are a large number of options most of them are very
rarely used. For PKCS#12 file parsing only -in and -out need to be used
for PKCS#12 file creation -export and -name are also used.
If none of the -clcerts, -cacerts or -nocerts options are present then
all certificates will be output in the order they appear in the input
PKCS#12 files. There is no guarantee that the first certificate present
is the one corresponding to the private key. Certain software which
requires a private key and certificate and assumes the first
certificate in the file is the one corresponding to the private key:
this may not always be the case. Using the -clcerts option will solve
this problem by only outputting the certificate corresponding to the
private key. If the CA certificates are required then they can be
output to a separate file using the -nokeys -cacerts options to just
output CA certificates.
The -keypbe and -certpbe algorithms allow the precise encryption
algorithms for private keys and certificates to be specified. Normally
the defaults are fine but occasionally software can't handle triple DES
encrypted private keys, then the option -keypbe PBE-SHA1-RC2-40 can be
used to reduce the private key encryption to 40 bit RC2. A complete
description of all algorithms is contained in the pkcs8 manual page.
Prior 1.1 release passwords containing non-ASCII characters were
encoded in non-compliant manner, which limited interoperability, in
first hand with Windows. But switching to standard-compliant password
encoding poses problem accessing old data protected with broken
encoding. For this reason even legacy encodings is attempted when
reading the data. If you use PKCS#12 files in production application
you are advised to convert the data, because implemented heuristic
approach is not MT-safe, its sole goal is to facilitate the data
upgrade with this utility.
EXAMPLES
Parse a PKCS#12 file and output it to a file:
openssl pkcs12 -in file.p12 -out file.pem
Output only client certificates to a file:
openssl pkcs12 -in file.p12 -clcerts -out file.pem
Don't encrypt the private key:
openssl pkcs12 -in file.p12 -out file.pem -nodes
Print some info about a PKCS#12 file:
openssl pkcs12 -in file.p12 -info -noout
Create a PKCS#12 file:
openssl pkcs12 -export -in file.pem -out file.p12 -name "My Certificate"
Include some extra certificates:
openssl pkcs12 -export -in file.pem -out file.p12 -name "My Certificate" \
-certfile othercerts.pem
SEE ALSO
pkcs8(1)
COPYRIGHT
Copyright 2000-2020 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the OpenSSL license (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
in the file LICENSE in the source distribution or at
<https://www.openssl.org/source/license.html>.
1.1.1i 2020-12-10 PKCS12(1)