Updated: 2022/Sep/29

Please read Privacy Policy. It's for your privacy.

RUMP_CD9660(8)              System Manager's Manual             RUMP_CD9660(8)

     rump_cd9660 - mount a cd9660 image with a userspace server

     file-system PUFFS
     pseudo-device putter

     rump_cd9660 [options] image mountpoint

     NOTE! This manual page describes features specific to the rump(3) file
     server.  Please see mount_cd9660(8) for a full description of the
     available command line options.

     The rump_cd9660 utility can be used to mount cd9660 file systems.  It
     uses rump(3) and p2k(3) to facilitate running the file system as a server
     in userspace.  As opposed to mount_cd9660(8), rump_cd9660 does not use
     file system code within the kernel and therefore does not require kernel
     support except puffs(4).  Apart from a minor speed penalty there is no
     downside with respect to in-kernel code.

     rump_cd9660 does not require using vnconfig(8) for mounts from regular
     files and the file path can be passed directly as the image parameter.
     In fact, the use of vnconfig(8) is discouraged, since it is unable to
     properly deal with images on sparse files.

     In case the image contains multiple partitions, the desired partition
     must be indicated by appending the token "%DISKLABEL:p%" to the image
     path.  The letter "p" specifies the partition as obtained via
     disklabel(8).  For example, to mount partition "e" from image
     /tmp/wd0.img, use "/tmp/wd0.img%DISKLABEL:e%".

     It is recommended that untrusted file system images be mounted with
     rump_cd9660 instead of mount_cd9660(8).  Corrupt file system images
     commonly cause the file system to crash the entire kernel, but with
     rump_cd9660 only the userspace server process will dump core.

     To use rump_cd9660 via mount(8), the flags -o rump and -t cd9660 should
     be given.  Similarly, rump_cd9660 is used instead of mount_cd9660(8) if
     "rump" is added to the options field of fstab(5).

     p2k(3), puffs(3), rump(3), mount_cd9660(8)

     The rump_cd9660 utility first appeared in NetBSD 5.0.

NetBSD 10.99                   November 21, 2010                  NetBSD 10.99