I would appreciate any donations. Wishlist or send e-mail type donations to maekawa AT daemon-systems.org.

Thank you.

SM(4)                        Device Drivers Manual                       SM(4)

     sm - SMC91Cxx-based Ethernet interfaces device driver

     sm0 at ifpga0 addr 0xb8000000 irq 27
     sm0 at isa? port 0x300 irq 10
     sm* at mhzc?
     sm* at pcmcia? function ?
     sm* at nubus?

     The sm device driver supports SMC91C9x-based and SMC91C1xx-based Ethernet

     The ifpga0 attachment of the sm driver supports SMC91C9x-based Ethernet
     interface on the ARM Integrator/CP board.

     The ISA attachment of the sm driver supports any SMC91C9x-based Ethernet
     interface on the ISA bus, including the EFA Info*Express SVC VLB
     interface, and the on-board SMC91C9x Ethernet found in many embedded PCs
     and laptop docking stations.

     The mhzc attachment of the sm driver supports the Megahertz combo
     Ethernet and modem card.

     The PCMCIA attachment of the sm driver supports Megahertz X-JACK Ethernet

     The nubus attachment of the sm driver supports SMC-based Ethernet cards
     for the macintosh.

     The SMC91C1xx supports the MII interface and so the list of supported
     media depends on several factors, including which PHY is attached.  The
     SMC91C9x supports AUI and UTP media types.

     To enable the AUI media, select the 10base5 or aui media type with
     ifconfig(8)'s media directive.  To select UTP, select the 10baseT or utp
     media type.

     ifconfig(8)'s -m option will display the full list of supported media
     directives for a particular configuration.

     sm0: unable to read MAC address from CIS  This indicates that the
     Ethernet address, which is stored in the CIS information on the Megahertz
     X-JACK PCMCIA Ethernet card, is corrupted.

     ifmedia(4), intro(4), isa(4), mhzc(4), mii(4), pcmcia(4), ifconfig(8)

NetBSD 8.99.34                 September 6, 2017                NetBSD 8.99.34