Updated: 2022/Sep/29

Please read Privacy Policy. It's for your privacy.

HPTIDE(4)                    Device Drivers Manual                   HPTIDE(4)

     hptide - Triones/Highpoint IDE disk controllers driver

     hptide* at pci? dev ? function ? flags 0x0000

     The hptide driver supports the Triones/Highpoint HPT366, HPT370, HPT370A,
     HPT372 and HPT374 IDE controllers, and provides the interface with the
     hardware for the ata(4) driver.

     The 0x0002 flag forces the hptide driver to disable DMA on chipsets for
     which DMA would normally be enabled.  This can be used as a debugging
     aid, or to work around problems where the IDE controller is wired up to
     the system incorrectly.

     ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)

     The timings used for the PIO and DMA modes for controllers listed above
     are for a PCI bus running at 30 or 33 MHz.  This driver may not work
     properly on overclocked systems.

NetBSD 9.99                     October 8, 2003                    NetBSD 9.99