Updated: 2022/Sep/29

Please read Privacy Policy. It's for your privacy.

LPR(1)                      General Commands Manual                     LPR(1)

     lpr - off line print

     lpr [-cdfghlmnopqRrstv] [-1234 font] [-# num] [-C class] [-i numcols]
         [-J job] [-P printer] [-T title] [-U user] [-w num] [name ...]

     lpr uses a spooling daemon to print the named files when facilities
     become available.  If no names appear, the standard input is assumed.

     The following single letter options are used to notify the line printer
     spooler that the files are not standard text files.  The spooling daemon
     will use the appropriate filters to print the data accordingly.

     -c      The files are assumed to contain data produced by cifplot

     -d      The files are assumed to contain data from tex (DVI format from

     -f      Use a filter which interprets the first character of each line as
             a standard FORTRAN carriage control character.

     -g      The files are assumed to contain standard plot data as produced
             by the plot routines (see also plot for the filters used by the
             printer spooler).

     -l      Use a filter which allows control characters to be printed and
             suppresses page breaks.

     -n      The files are assumed to contain data from ditroff (device
             independent troff).

     -o      The files are assumed to be in postscript format.

     -p      Use pr(1) to format the files (equivalent to print).

     -t      The files are assumed to contain data from troff(1) (cat
             phototypesetter commands).

     -v      The files are assumed to contain a raster image for devices like
             the Benson Varian.

     These options apply to the handling of the print job:

     -h      Suppress the printing of the burst page.

     -m      Send mail upon completion.

     -P      Force output to a specific printer.  Normally, the default
             printer is used (site dependent), or the value of the environment
             variable PRINTER is used.

     -q      Queue the print job but do not start the spooling daemon.

     -r      Remove the file upon completion of spooling or upon completion of
             printing (with the -s option).

     -s      Use symbolic links.  Usually files are copied to the spool
             directory.  The -s option will use symlink(2) to link data files
             rather than trying to copy them so large files can be printed.
             This means the files should not be modified or removed until they
             have been printed.

     Normally lpr works silently except for diagnostic messages.  The
     following option changes this behavior.

     -R      Writes a message to standard output containing the unique number
             which is used to identify this job.  This number can be used to
             cancel (see lprm(1)) or find the status (see lpq(1)) of the job.

     The remaining options apply to copies, the page display, and headers:

     -#num   The quantity num is the number of copies desired of each file
             named.  For example,

                   lpr -#3 foo.c bar.c more.c
             would result in 3 copies of the file foo.c, followed by 3 copies
             of the file bar.c, etc.  On the other hand,

                   cat foo.c bar.c more.c | lpr -#3

             will give three copies of the concatenation of the files.  Often
             a site will disable this feature to encourage use of a
             photocopier instead.

     -[1234] font
             Specifies a font to be mounted on font position i.  The daemon
             will construct a .railmag file referencing the font pathname.

     -C class
             Job classification to use on the burst page.  For example,

                   lpr -C EECS foo.c

             causes the system name (the name returned by hostname(1)) to be
             replaced on the burst page by EECS, and the file foo.c to be

     -i -numcols
             The output is indented by (numcols).

     -J job  Job name to print on the burst page.  Normally, the first file's
             name is used.

     -T title
             Title name for pr(1), instead of the file name.

     -U user
             User name to print on the burst page, also for accounting
             purposes.  This option is only honored if the real user-id is
             daemon (or that specified in the printcap file instead of
             daemon), and is intended for those instances where print filters
             wish to requeue jobs.

     -wnum   Uses num as the page width for pr(1).

     If the following environment variable exists, it is used by lpr:

     PRINTER  Specifies an alternative default printer.

     /etc/passwd              Personal identification.
     /etc/printcap            Printer capabilities data base.
     /usr/sbin/lpd            Line printer daemons.
     /var/spool/output/*      Directories used for spooling.
     /var/spool/output/*/cf*  Daemon control files.
     /var/spool/output/*/df*  Data files specified in "cf" files.
     /var/spool/output/*/tf*  Temporary copies of "cf" files.

     If you try to spool too large a file, it will be truncated.  lpr will
     object to printing binary files.  If a user other than root prints a file
     and spooling is disabled, lpr will print a message saying so and will not
     put jobs in the queue.  If a connection to lpd(8) on the local machine
     cannot be made, lpr will say that the daemon cannot be started.
     Diagnostics may be printed in the daemon's log file regarding missing
     spool files by lpd(8).

     lpq(1), lprm(1), pr(1), symlink(2), printcap(5), lpc(8), lpd(8)

     The lpr command appeared in 3BSD.

     Fonts for troff(1) and tex reside on the host with the printer.  It is
     currently not possible to use local font libraries.

NetBSD 10.99                   January 17, 2006                   NetBSD 10.99